Industry leading semi-automatic slitting machine
What is the working principle of the slitting machine?
The slitting machine consists of five parts: uncoiling-leveling-slitting-squeezing-rewinding
Technical Parameters of Industry leading semi-automatic slitting machine
| No. | Item | Specification |
| 1 | Can Formed Material | PPGI,GI,AI |
| 2 | Equipment operation | Automatic |
| 3 | Voltage | 380V 50HZ 3Phases or as your requirement |
| 4 | Thickness of sheet(mm) | 1.0mm-2.0mm |
| 5 | Material width(mm) | As your requirement |
| 6 | Cover Width of the sheet after formed | As your drawing |
| 7 | The size of the roll forming machine | 2600mmx1800mmx1500mm |
| 8 | Speed | 15m-30m/min |
| 9 | Diameter of shaft | 103mm |
| 10 | Weight Of the Machine | 7500KGS-9500KGS |
| 11 | Material of rollers | #45 steel quenched and chromed |
| 12 | Motor Brand | Popular brank made in China |
| 13 | PLC | Siemens or Delta or Mitsubishi |
| 14 | Total power(kw) | 30 KW |
| 15 | Power of hydraulic system | 4kw |
| 16 | Power of main molding core | 26kw |
The uncoiling part of the slitting machine is to place the large roll of material on the uncoiler, and then unwind the material roll through the uncoiler
The leveling part of the slitting machine is to flatten the unfolded material roll to ensure the flatness of the material (because the material is in a bent state after the large roll of material is unfolded, in order to ensure the dimensional accuracy of the slitting, the roll material needs to be leveled)
The slitting part of the slitting machine conveys the flattened roll material to the slitting machine, and cuts the material one by one through the extremely sharp circular blades at different distances in the slitting machine, so as to achieve the required slitting of the material Broadband roll material.
The squeezing part of the slitting machine is used to assist the rewinding of the later roll material (because the roll material after slitting is relatively loose, if the rewinding is carried out directly, the roll material after the rewinding is loose and difficult to pack or store, and It may cause winding during the rewinding process, so the squeezing device is needed to assist the rewinding)
The rewinding part of the slitting machine is assisted by the extrusion device to rewind the multi-slice material after slitting to facilitate the next production, storage and transportation.
Product Tags:
|
|
Semi Automatic 15-30m/Min 1.0mm Steel Slitting Line Images
|
