T1.2mm Light Gauge Steel Framing Machine 8 Rollers

Safe And Lightweight Light Steel Villa Keel Forming Machine

Structural features of "safe and lightweight light steel villa keel forming machine":

1. Floor structure

The floor of "safe and lightweight light steel villa keel forming machine" is composed of cold-formed thin-walled steel frame or composite beam, floor OSB structural panel, bracket, connector, etc. The materials used are oriented strand board, cement fiberboard and plywood. Each square meter of these lightweight panels can withstand loads of 316 to 365 kilograms.

The weight of the "safe and lightweight light steel villa keel forming machine" floor structure system is only one-quarter to one-sixth of the weight of the traditional household concrete floor system, but the floor structure height will be 100-120 mm higher than ordinary concrete slabs.

2. Roofing system

"Safe and lightweight light steel villa keel forming machine" roof system is composed of roof truss, structural OSB panel, waterproof layer, light roof tiles (metal or asphalt shingles).

"Safe and lightweight light steel villa keel forming machine" structure roof, appearance can have many combinations. There are also many kinds of materials. On the premise of ensuring waterproof technology, there are many options for appearance.

Technical parameters of Safe And Lightweight Light Steel Villa Keel Forming Machine

1. Profile
1.1 Coil material thickness:1mm- 1.5mm
1.2 Feeding width:180mm

2. Process flow
De-coiling--feeding---forming---cutting---finish product

3. Manual decoiler
3.1 Inside diameter coil is 450 - 550mm
3.2 Coil Width is 300 mm
3.3 Coil load 1.5 ton

4 Forming device
4.1 Shaft material: 45# steel , outer diameter:70mm
4.2 Roller material: #45 steel
4.3 Pairs of forming rollers : 8 sets
4.4 Chains transport: Gear transmission
4.5 Forming speed:10m/min
4.6 Main motor power:5.5kw
4.7 Voltage:380v,50Hz,3Phase

5. Hydraulic Cutting device
5.1 Hydraulic Station:1set
5.2 With hydraulic station, motor 3 KW
5.3 Hydraulic cutting
5.4 Blade and mold material: GCR12Movo steel with quenched treated 60-62℃
5.5 Cutting system: advanced hydraulic drive, automatic cutting after forming,
no distorting or wasting, high level safety factor.

6.Control Device
6.1 Screen: Detla screen
6.2 Automatic length measurement
6.3 Automatic quantity measurement
6.4 .PLC is used to control length and quantity. Machine will automatically cut
to length and stop when required quantity is achieved
6.5 Length inaccuracy can be amended easily
7.Simple output frame

T1.2mm Light Gauge Steel Framing Machine

8 Rollers Light Gauge Steel Framing Machine

T1.2mm Light Gauge Steel Framing Machine 8 Rollers Images